陈皮中微量铜的分光光度法测定

采用混合酸V(HNO3) V(HClO4)=5 1对新鲜蕉柑的陈皮和果肉样品进行湿法消化处理,并用分光光度法测定了陈皮和果肉中铜的含量。该法的回收率为96.9%~100.8%,相对标准偏差在0.28%~3.94%之间,方法简便、快速、准确。     

VOCs控制催化剂的研制

以堇青石蜂窝陶瓷体为第一载体、γ-Al2O3为第二载体,制成的含稀土La和过渡金属元素的复合氧化物催化剂,在连续流动的反应体系上评价了催化剂对苯、氰氢酸、乙酸和氯苯等VOCs的氧化反应活性.结果表明: 采用LaCuMn组合制备的催化剂,La的含量在7%～10%左右、Cu的含量在5.5%左右、Mn的含量在7.5%左右时,第二载体γ-Al2O3的负载以采用半胶、pH值4～5、加入某些活性剂、负载量以7%～10%、活化温度为400～500 ℃时制成的催化剂的活性最好,研制的VOCs控制催化剂对各种VOCs均具有很高的催化活性.     

甲基丙烯酸甲酯悬浮聚合实验教学的改进

选用氢氧化镁为分散剂,甲基丙烯酸甲酯(MMA)为单体,进行悬浮聚合反应,研究了分散剂用量、引发剂用量、水和单体比、搅拌速度、反应温度及反应时间对聚合物珠粒大小、均匀程度和产率的影响。结果表明:与目前高分子实验教材普遍选用的以聚乙烯醇(PVA)为分散剂的悬浮聚合反应相比,以氢氧化镁为分散剂,具有操作简单、聚合时间短、体系稳定性高等优点,可代替原有的悬浮聚合反应实验,作为高分子化学实验的教学课程内容。     

Designed nanostructured pt film for electrocatalytic activities by underpotential deposition combined chemical replacement techniques

Multiple-deposited Pt overlayer modified Pt nanoparticle (MD-Pt overlayer/PtNPs) films were deliberately constructed on glassy carbon electrodes through alternately multiple underpotential deposition (UPD) of Ag followed redox replacement reaction by Pt (II) cations. The linear and regular growth of the films characterized by cyclic voltammetry was observed. Atomic force spectroscopy (AFM) provides the surface morphology of the nanostructured Pt films. Rotating disk electrode (RDE) voltammetry and rotating ring-disk electrode (RRDE) voltammetry demonstrate that the MD-Pt overlayer/PtNPs films can catalyze an almost four-electron reduction of O(2) to H(2)O in air-saturated 0.1 M H(2)SO(4). Thus-prepared Pt films behave as novel nanostructured electrocatalysts for dioxygen reduction and hydrogen evolution reaction (HER) with enhanced electrocatalytic activities, in terms of both reduction peak potential and peak current, when compared to that of the bulk polycrystalline Pt electrode. Additionally, it is noted that after multiple replacement cycles, the electrocatalytic activities improved remarkably, although the increased amount of Pt is very low in comparison to that of pre-modified PtNPs due to the intrinsic feature of the UPD-redox replacement technique. In other words, the electrocatalytic activities could be improved markedly without using very much Pt by the technique of tailoring the catalytic surface. These features may provide an interesting way to produce Pt catalysts with a reliable catalytic performance as well as a reduction in cost.     

Recent Advances in Rare‐Earth Polypnictides

The polypnictide complexes of rare earth cations have drawn the attention of the scientific community for their uncommon bonding modes and potential applications. Herein, we present a systematic and comprehensive summary on recent advances in the field of rare earth polypnictides, focusing on their synthesis, structures, and reactivities. The structural stabilizing effects imposed by the electropositive rare earth cations as well as the reducing capability of rare earth precursors in the synthesis of these polypnictide complexes are described in this review. We also disscuss in detail the bonding interactions and coordination modes between rare earth cations and polypnictide clusters as well as the similarities and the peculiarity of some structures.     

三(2-苯并咪唑亚甲基)胺硝酸镍(Ⅱ)配合物的合成及结构

三（２－苯并咪唑亚甲基）胺简称ＮＴＢ与Ｎｉ（Ⅱ）的硝酸盐形成配合物Ｃ２８Ｈ３５Ｎ９Ｏ９Ｓ２Ｎｉ。本文报道其合成，红外光谱及晶体结构。该化合物为三斜晶系，空间Ｐ１↑－，ａ＝９．６５０（３），ｂ＝１２．７１６（２），ｃ＝１４．４３６Ａ，α＝１１．４６（２），β＝９１．６６（３），γ＝９７．５５（２）°，Ｖ＝１７１８（２）Ａ＾３，Ｚ＝２，Ｆ（０００）＝７９３，Ｄｃ＝１．４８ｇ／ｃｍ＾３，Ｍｒ＝７６４．１     

金属配合物高效液相色谱法测定人发和血清中锌,钴,铜的含量

选用8-羟基喹啉为配合剂，经柱前衍生后高效波相色谱法分离测定，建立了人发和血清中微量元素锌、钴、铜的含量测定方法，该法配合产物稳定性好，标准曲线的线性范围锌、铜均为0．8～4．0mg／L，钴为0．1～2．0mg／L，相关系数均0．999以上，批内、批间相对标准偏差均小于5％，加样回收率锌为（100．3±0.47）％，钴为（98．9±2．07）％，铜为（100.9±0．65）％。     

固载化聚乙二醇三相催化下香豆素的合成

研究了固载化聚乙二醇三相催化下香豆素的合成，探讨了影响反应的主要因素。结果表明，该反应的最佳反应条件为：水杨醛与碳酸钾的摩尔比为 １： ０．７５，反应温度为１７５℃，反应时间为３．５ ｈ，该条件下香豆素的收率为 ６５．７％。     

Comparative X-ray photoelectron spectroscopic study on the desulfurization of thiophene by Raney nickel and rapidly quenched skeletal nickel

The desulfurization of thiophene on Raney Ni and rapidly quenched skeletal Ni (RQ Ni) has been studied in ultrahigh vacuum (UHV) by X-ray photoelectron spectroscopy (XPS). The Raney Ni or RQ Ni can be approximated as a hydrogen-preadsorbed polycrystalline Ni-alumina composite. It is found that thiophene molecularly adsorbs on Raney Ni or RQ Ni at 103 K. At 173 K, thiophene on alumina is desorbed, while thiophene in direct contact with the metallic Ni in Raney Ni undergoes C-S bond scission, leading to carbonaceous species most probably in the metallocycle-like configuration and atomic sulfur. On RQ Ni, the temperature for thiophene dissociation is about 100 K higher than that on Raney Ni. The lower reactivity of RQ Ni toward thiophene is tentatively attributed to lattice expansion of Ni crystallites in RQ Ni due to rapid quenching. The existence of alumina and hydrogen may block the further cracking of the metallocycle-like species on Raney Ni and RQ Ni at higher temperatures, which has been the dominant reaction pathway on Ni single crystals. By 473 K, the C 1s peak has disappeared, leaving nickel sulfide on the surface.